Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Wrightwood, CA
Gate installation in Wrightwood is a mountain job, not a valley job. We install gates on sloped, rocky lots where posts get set into decomposed granite, where snowplows pile ice against hinges every winter, and where a gate has to swing open fast when an evacuation order comes through. Gate Repair Victorville has served Wrightwood since 2013, and the work up here starts with one question: can this gate handle six feet of snow and still open when the power is out? Call (833) 589-9763 for a free estimate.
Why Wrightwood Homes Are Different
At roughly 6,000 feet in the San Gabriel Mountains, Wrightwood sees winter snow measured in feet, not inches. Freeze-thaw cycles are the local gate killer. Water seeps into post footings at night, freezes, expands, and over a single season a gate post that was plumb in October is leaning by March. The alpine reality means hinge bolts shear, latch plates no longer line up, and cantilever wheels on sliding gates bind in ways you never see down in Victorville or Hesperia.
The housing stock up here runs from mid-century mountain cabins to 1970s and 80s chalets to newer custom builds, many on irregular lots cut into the hillside. Gates are frequently mounted on retaining walls or set on uneven terrain where the post depth and base material vary from one side to the other. Wrought iron and chain-link driveway gates take direct hits from snow throwers and plow trucks. Wooden pedestrian gates warp in the dry summer wind after months of winter moisture. A Wrightwood gate has to work after three feet of powder, and it has to work manually when PG&E or SCE cuts power during fire season. That dual demand shapes everything we install and repair on this mountain.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Wrightwood Services
Wrightwood homeowners and property managers call us for two things more than anything else: a gate that won’t open and an electric operator that stopped responding. Here is what each one involves up here.
Gate Repair in Wrightwood
When a gate is dragging, sagging, or stuck shut, the cause in Wrightwood is usually visible: a bent hinge from a snowplow push, a post that heaved out of rocky soil, a latch that froze and got forced. We repair what is there rather than pushing a replacement. That means cutting out rusted hardware, resetting posts with deeper concrete in aggregate that drains better than what the original builder used, and realigning the gate so it swings true again. Full details are on the Gate Repair in Wrightwood page.
Electric Gate Repair in Wrightwood
Mountain cold drains batteries faster, moisture gets into control boards, and ice jams the mechanical limits of swing arms. We diagnose electric gate problems by testing the motor, the board, the sensors, and the wiring separately, because a gate that stops mid-cycle is rarely one failure. It’s usually two or three things working against each other. If the operator is dead, we also check what the power situation at the post looks like, because Wrightwood wiring is often older and exposed to weather. More on what that involves is on the Electric Gate Repair in Wrightwood page.
Gate Installation in Wrightwood
A new gate in Wrightwood has to be engineered for what the mountain throws at it. We install gates on sloped lots, use post depths and concrete mixes suited to freeze-thaw ground, and build in manual release options so the gate still opens when power is cut. Whether you need a replacement driveway gate or a full automatic system, we quote the job up front and do the work without handing you off. See our Gate Installation service hub for the full range.
Automatic Gate Installation
Signs you need it
You’re opening the gate by hand every time, the current operator is a single-brand unit that no local shop can diagnose, or you’ve had a close call where the gate wouldn’t cycle during an evacuation order.
What it costs in Wrightwood
Automatic gate installation in Wrightwood typically runs $3,200 to $12,500 depending on operator type, gate length, and whether we’re trenching power from the house or adding a solar kit.
How we do it
We set the posts, hang the gate, install the operator and control board, wire the safety sensors and keypad, then cycle the gate repeatedly to tune limits and force settings for the site’s specific slope and wind exposure.
Driveway Gate Installation
Signs you need it
The existing gate is rusted through at the hinges, the posts have shifted enough that re-hanging isn’t worth it, or the gate is too heavy for the current post footings.
What it costs in Wrightwood
A new driveway gate with hardware and basic installation in Wrightwood most often lands between $2,100 and $7,500 depending on material, width, and whether we’re reusing the existing posts or setting new ones.
How we do it
We measure the opening and slope, check the existing post condition, build or order the gate, set posts only where current ones fail, then hang and align the gate so it swings or slides without binding.
Electric Gate Installation
Signs you need it
You’re adding automation to a manual gate, replacing a dead operator with a different brand, or extending automation to a second gate on the property.
What it costs in Wrightwood
Electric gate installation in Wrightwood runs $3,200 to $12,500 when it includes the operator, control board, safety sensors, keypad, and the power run or solar option.
How we do it
We select the operator based on gate weight and daily cycle count, install the motor and arm, wire the board and sensors, set limits and force, and program remotes and keypad codes on site.
Sliding Gate Installation
Signs you need it
The driveway slopes up sharply from the road, there’s no swing clearance behind the gate, or you’re tired of clearing a swing path through snow each winter.
What it costs in Wrightwood
Sliding gate installation in Wrightwood typically costs $2,800 to $10,000, with the higher end reflecting heavier gates, longer track runs, and sites where the track must be set above grade.
How we do it
We pour or set the track, mount the gate on rollers, install the operator and safety edges, then adjust the cantilever geometry so the gate travels smoothly even when ice builds up on the lower track.
What Gate Installation Costs in Wrightwood
| Item | Typical range in Wrightwood |
|---|---|
| Standard driveway gate (single swing, steel or iron) | $2,100 – $7,500 |
| Automatic operator with electronics and sensors | $3,200 – $12,500 |
| Sliding gate on track or cantilever | $2,800 – $10,000 |
| Custom gate on sloped or retaining-wall lot | $4,500 – $15,000+ |
What does a full gate installation include in Wrightwood?
Every installation includes the gate, posts or track, all hardware, and basic installation labor. Automatic systems add the operator, control board, safety sensors, keypad, remotes, and the power or solar connection. We confirm the full scope in writing before work starts.
Do you handle the power run and safety edges on Wrightwood installs?
Yes. We trench conduit, pull the low-voltage and line-voltage wiring, and install the safety edges or photo eyes the operator brand requires. On Wrightwood lots with rocky soil, we route the power run above grade where trenching isn’t practical.
Brands We Service in Wrightwood
We work on Linear, Viking, Ghost Controls, and DoorKing systems, along with five other major operator lines. Parts for common swing-arm and slide operators can usually be sourced and installed within days, not weeks. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Wrightwood, CA
| Service | Typical range in Wrightwood |
|---|---|
| Gate repair (hinge, post, latch, realignment) | $180 – $1,400 |
| Electric gate diagnostics and minor repair | $200 – $950 |
| Control board replacement | $450 – $1,200 |
| Motor or operator replacement | $750 – $2,500 |
| Safety sensor or loop detector repair | $220 – $650 |
| Gate Installation (standard driveway gate) | $2,100 – $7,500 |
| Automatic gate installation | $3,200 – $12,500 |
| Sliding gate installation | $2,800 – $10,000 |
| Electric gate installation | $3,200 – $12,500 |
What pushes a Wrightwood job toward the top of a range is almost always the site itself: sloped access, rocky post holes, the need for a solar power kit, or a gate so buried in snow that we’re clearing it before we can start. Whatever the number, you hear it and approve it before we turn a wrench. Call (833) 589-9763 for an exact quote, free estimates.
Neighborhoods We Serve in Wrightwood
We cover all of Wrightwood, including the 92372 and 92397 ZIP codes, and travel anywhere on the mountain where there’s a gate that needs to work. We’re also up here regularly for cabins and chalets off the main roads.
- Central Wrightwood village and Park Drive
- Lone Pine Canyon
- Mountain High area
- Swarthout Valley
- East Canyon and the upper Angeles Crest corridor
Service Area – Cities Near Wrightwood
Wrightwood is our mountain base, but we work the surrounding High Desert and mountain communities too. Many of our Wrightwood clients also own property in Piñon Hills, CA and Phelan, CA, where gates face the same wind and dust, plus Oak Hills, CA and Hesperia, CA, where we run regular service routes.
Serving Wrightwood, CA – Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Wrightwood
We run service routes up the mountain every week during winter, and we schedule emergency calls around storms when roads are open. Wrightwood jobs get worked into the day’s route based on urgency and the SR-2 access from the Victorville area.
Some Wrightwood properties sit in San Bernardino County jurisdiction with setback and height limits, and some are in HOA-governed tracts with design standards. We review the specific property before quoting and flag any permit or approval the project will need. Call (833) 589-9763 to talk through your site.
Yes. We diagnose by what’s on the motor, board, and arm, not by what you remember buying. Even if the label is faded or the gate was installed by a previous owner, we identify the operator family and service it accordingly. Call (833) 589-9763 and we’ll sort it out.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Wrightwood Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Matt Miller"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Yolanda Vargas"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Jessica Yang